Emergency repair, thermal scanning, preventive maintenance and tap-off modification for any brand, from 100 to 4000 A.
EVision Energy maintains, repairs, modifies and installs busbar (busway) riser systems in towers, hotels, malls and residential buildings across Qatar. Our engineers have delivered 250+ busway projects, and we run a 24-hour emergency line for failures.
Burnt or failed joints, tripping risers and hot spots: we come on site day or night and restore supply safely.
Infrared inspection of joints and tap-off units to find hot spots before they fail.
Torque checks, insulation resistance testing, cleaning and reports for facility managers.
Replacement of damaged joint packs and sections for any busbar brand.
Adding, moving or upgrading tap-off units for new loads and fit-outs.
Thermal images, test values and clear recommendations in a report your facility team can act on.
New risers, extensions and section replacements, 100 to 4000 A: installed, joints torqued, Megger tested and energised.
We install busway risers of any brand, maintain them and answer 24 h emergencies, from 100 to 4000 A.
The same six steps on every call-out, from an emergency at 2 a.m. to a planned shutdown.
WhatsApp or call any time. We ask for the building, the riser and a photo, and dispatch an engineer for emergencies.
The affected section is isolated and locked off, and the area is secured before any work starts.
Infrared scan of joints and tap-offs under load, plus insulation-resistance testing to find the real cause.
Failed joint packs, damaged sections or tap-off units are rectified or replaced, for any busbar brand.
Joints are torqued to the manufacturer value and the riser is tested before it is re-energised.
You receive the thermal images, test values and a signed completion and workmanship-warranty certificate.
Annual maintenance for busway risers and EV chargers. Priced per site after a survey.
Yes. For burnt joints, tripping risers or hot spots, call or WhatsApp us at any time and an engineer will be dispatched to make the site safe and restore supply.
Any brand. Our engineers maintain, repair and modify busway systems from all the common manufacturers installed in Qatar, from 100 to 4000 A.
They are the same system. Busway (or busbar trunking) is the enclosed busbar system that carries power up a building in a riser, with tap-off units feeding each floor.
Most buildings need a preventive inspection at least once a year, including thermal scanning under load and torque checks on joints. Older or heavily loaded risers benefit from more frequent checks.
Loose joints, overload, moisture and dust raise the contact resistance, which creates heat. Thermal scanning finds these hot spots early, before they cause a shutdown or fire.
Yes. We assess the riser capacity, modify or relocate the tap-off unit to suit the new load, then test it with minimum downtime.
Send us the site location and a photo. We reply the same day.